Large tire dismantling machine need to pay attention to, can rotate the direction of the shovel, dispose of different diameters of tires with different center heights of tire pressure results

1, hexagonal shaft, due to the use of S41mm high-quality carbon structural steel material, the rigidity is greatly improved, not easy to deformation, so that you in the disassembly of hard wall, flat tires more safe and reliable.

2, the turntable, using δ15mm thick high-quality carbon structural steel, its steel and strength are reliable guarantee, the turntable surface using hard chrome plating process not only added wear resistance and improve the anti-corrosion ability.

3, disassembly head, the use of high-quality alloy material processing, more to ensure the use of strength.

4, the machine is equipped with disassembly head maintenance cover, maintenance pad, claw maintenance cover, crowbar maintenance cover and tire shovel protective cover. It will not scratch the rim when disassembling the aluminum alloy rim.

5, the turntable clamp size range is large, can meet the small and medium-sized truck and car tire disassembly work.

6, the tire inflation system for the inflation watch box type and with rubber material inflation hose, the use of more durable, more safe.

7, this machine with a "C" level configuration, the so-called "C" level configuration for the vacuum tire rapid inflation device, can make the vacuum tire mouth and rim edge close contact, so as to deal with the ordinary inflation system on one side of the inflation, one side leakage defects.

8, can promote the model, can be selected according to the demand HL410 guideway slide, arbitrary Angle tire roller robot hand or AL410+AR410+WL65 luxury double assistant and tire elevator to easily disassemble and install tires.

9. The gas storage tank is built-in, and the cylinder exposed outside the machine is replaced by a round column, which can add more limited air volume of the machine, so that the space can be effectively used.

10, the turntable is equipped with steel, wear-resistant slide, adding a clamp rim to the wear of the turntable itself, extend the service life of the turntable.

11, the pneumatic tire pressure shovel has two gears, fully considering the tire pressure results of ultra-wide tires. The tire dismantling machine belongs to the traditional maintenance equipment, the technical content is not high, and the equipment manufacturers are basically in the stage of low profit.

At present, slightly better repair shops are equipped with tire removal machines, as a professional tire shop, tire removal machine is essential. Abnormal, about the ordinary repair shop, the use of tire removal machine can greatly improve the efficiency, the original 30 minutes can be disposed of the results, and now the lack of 5 minutes can be easily done, and the maintenance staff is very easy.